- Additional information
Protium is a set of components for creating pump and reservoir combinations which increases performance, mounting options, flow inlet/outlet options and will be a feature in your build. We set out to create the most minimalistic and compact components, but at the same time providing the most options and compatibility. Our components are refined in ways only possible due to our 15 years of experience in liquid cooling. Each component is carved from a solid block of material on a CNC mill. Creating our different finishes, frosted and polished acrylic is unique and takes a lot of effort to manufacture. Protium is designed for enthusiasts who want to enjoy building systems with the freedom to create something individual.
Protium reservoirs have 7 ports for maximum loop design options. On one end is a low profile three port cap and on the other end a 90 degree quad port cap. The quad port cap allows for a hidden inlet/outlet configuration, it also creates an aesthetic feature. Both caps have 3mm LED mounting positions to create a lighting feature and lighting up the coolant, the frosted acrylic version acts as a light diffusor. Protium has an aluminum retention ring design allowing the caps to be rotated to face any direction, this is something we don’t often see and is vital for clean loop design. There is no acrylic on acrylic thread and the o-ring surface does not rotate onto the o-ring, this increases quality and reliability.
Vastly increases inlet/outlet and loop design options.
Inlet/outlet positions at 90 degrees for a cleaner loop.
Caps can be rotated to face any direction.
No acrylic on acrylic threads.
O-ring surfaces do not rotate on the o-ring.
CNC milled Acrylic or Acetyl from a solid block.
CNC lathed aluminum retention rings.
7 ports. 3 port low profile cap and quad port 90 degree cap.
Just two components to create a full pump and reservoir combination.
Caps Material/Finish Options: Acrylic, Frosted Acrylic, Black Acetyl.
Retention Ring Color Options: Black, Silver.
3mm LED mounting positions on both caps.
The frosted acrylic version acts as a light diffuser.
Can be used standalone or with our pump components.
16mm hardline compression fittings fit side by side and on all ports directly.
60mm Acrylic Reservoir Tube (External Threads).
Aluminum Retention Rings: x2.
90 Degree Quad Port Cap.
Triple Port Cap.
16mm Internal Acrylic Flow Tube.
G1/4” Stop Fittings: x5.
Silicon O-rings x2.
D5 Pump & Reservoir Combos (Full assembly):
100mm = 230mm
150mm = 280mm
200mm = 330mm
250mm = 380mm
300mm = 430mm
350mm = 480mm
DDC Pump & Reservoir Combos (Full assembly):
200mm = 295mm
250mm = 345mm
300mm = 395mm
350mm = 445mm
|Dimensions||36 × 10.5 × 15.5 cm|