The Phanteks Enthoo Elite Vertical Distribution Plate fits onto the Reservoir Panel of the Phanteks Enthoo Elite. It will also fit into any other case the dimensions allow. It fits two Protium 200mm Pump Reservoir Combos so that you can have the best of both worlds, a Singularity Computers Distribution Plate and Protium Combos. This is a dual loop distribution plate. There are 20 ports, 8 of those are on the back for fill, drain and accessory ports. Fill drain and accessory ports are optional and can be closed with stop fittings along with any other unused ports. On the front there are 12 ports, 8 of these are the through ports to the above-mentioned ports on the back and 4 of these are for inlets and outlets. Each Protium Pump Top Outlet runs directly into the distro and the outlets are configured to align tubes to run over your top GPU, one for the GPU loop and one for the CPU loop. Then there are return lines at the top and bottom of the distro each returning to an inlet on each of the Protium Combos. This distro is designed to be used in combination with our Phanteks Elite Horizontal Distro in a dual loop configuration.
Created with a manufacturing process used in industries such as aerospace. All components are carved from a solid block of material. Over-engineered for maximum strength and lifespan. Stainless steel fasteners for maximum strength and corrosion resistance. Gaskets instead of O-rings for increased durability. No threads in the acrylic, instead we use stainless steel thread inserts. Our designs are consistently improved and optimized.
CNC Machined Cast Acrylic.
Stainless Steel Fasteners.
Large fluid volume.
Thread inserts instead of threaded acrylic.
Material: Cast Acrylic Clear: 10mm. Cast Acrylic Black: 10mm.
Manufacturing Process: CNC Router.
Gaskets: Silicone Black.
Dimensions: Width: 225mm x Height: 375mm x Thickness: 20mm.
Fasteners: M3 Stainless Steel Silver.
Ports: 20 G1/4” Ports. 8 optional ports for Fill, Drain and Accessories.
Phanteks Enthoo Elite Vertical Distribution Plate.
Mounting Fasteners: M4 25mm x4. M4 Washers x4. M4 Nuts x4. Stainless Steel Silver.
Install onto Phanteks Enthoo Elite Reservoir Mounting Panel. Mounting holes must be drilled and the distro can be used as a template for the hole positions. Design specifically for use with Singularity Computers Protium 200mm Pump and Reservoir Combinations. Outlet Holes are aligned so that tubes can be run over your top GPU to make Outgoing connections to two separate loops one for the CPU and one for the GPUs. There are ports on the back side of this distribution plate for fill, drain and accessories. These ports do not have to be used but if you would like to use them then the mounting area must be modified to gain access to them from the rear side of the case.
To connect the Protium D5 Reservoir Combos to the distribution plate the following fittings are required to make all connections. Three of the four connections on each Protium Combos are required if you would also like to add a Temperature Sensor to each loop along with a fill port and drain port. We have allowed for all four to be connected because these connections also mount the Protium Combos. Select the addon option and we will include these fittings along with factory assembly.
Bitspower 25mm Extension: x4.
Bitspower Mini D-Plug: x8.
We create the products we want in our builds based on our 15 years of experience building high end computers. All of our designs begin with function, versatility is vital to increase the possibilities so that you can create the build you want to, something unique. Our products are premium, we do not hold back on quality to save cost. All of our products use the most high end available materials and manufacturing processes. Our vision is to continue to introduce unique and exciting ideas, to inspire and lead the industry.