Designed by Singularity Computers and manufactured in the USA by Performance PCs.
This is a Dual Loop Distribution Plate which fits onto the front panel of the Lian Li PC-O11 Dynamic inside of the tempered glass front panel window. It has two separate reservoirs and fits two D5 pumps. It is compatible with any D5 pumps. It comes included with two D5 pump covers which quieten the pumps and have foam to dampen vibration. There are 4 ports per reservoir, 2 inlets and 2 outlets to allow for different tube routes and parallel. One of the outlets can be used as a drain port. There are fill ports for each loop on the front of the distribution plate which can be accessed by removing the tempered glass front panel window. It comes included with a DRGB Addressable LED strip.
NOTE: D5 Pumps Not Included.
Material: Clear Cast Acrylic.
Fasteners: Stainless Steel Silver.
Stand Offs: Brass.
Gaskets: Silicone Black.
O-rings: Silicone Black and Clear.
Stop Fittings: Brass Black Powder coat.
Ports: x10. Inlets: x4. Outlets: x4. Fill Ports: x2.
LED Strip: DRGB 5V Addressable.
Dimensions: Width: 194mm. Height 441mm. Depth 91mm.
PC-O11 Dual D5 Reservoir Distribution Plate: x1.
Stop fittings: x6.
Protium D5 Pump Covers Black: x2.
Singularity Computers Distribution Plate D5 Pump Top: x2.
D5 O-ring: x2.
Spectrum 2.0 DRGB LED Strip: x1.
Mounting Fasteners: M4-M3 Stand Off: x4. M3 6mm Countersunk Hex Bolts: x4.
Compatible with the Lian Li PC-O11 Dynamic. Remove the front panel tempered glass from the PCO11. Drill out the 4 rivets in the 4 corners of the case with a 4mm drill bit. Cleanup the debris left inside of the case. Attach the M4-M3 Stand Offs to the M4 threads on the 4 corners of the distribution plate. Position the distribution plate inside of the front panel and mount it with the included M3 6mm Countersunk fasteners (do not overtighten fasteners on the acrylic). Replace the front panel tempered glass.