Designed by Singularity Computers and manufactured in the USA by Performance PCs.
This is a Single Loop Distribution Plate which fits onto the front panel of the Corsair 5000X inside of the tempered glass front panel window. It has one reservoir and fits a single D5 pump. It is compatible with any D5 pump. It comes included with a D5 Retention Ring which attaches the pump to the distribution plate. There are 3 ports, 1 inlet, 1 outlet and a fill port on the front of the distribution plate which can be accessed by removing the tempered glass front panel window. It comes included with a DRGB Addressable LED strip.
NOTE: D5 Pump and Cover Not Included.
Material: Clear Cast Acrylic.
Fasteners: Stainless Steel Silver.
Stand Offs: Brass.
Gaskets: Silicone Black.
O-rings: Silicone Black and Clear.
Stop Fittings: Brass Black Powder coat.
Ports: x3. Inlet: x1. Outlet: x1. Fill Port: x1.
LED Strip: DRGB 5V Addressable.
Dimensions: Width: 140mm. Height 381mm. Depth 16mm.
Corsair 5000X D5 Reservoir Distribution Plate: x1.
Stop fittings: x1.
SC Reservoir Retention Ring: x1.
Singularity Computers Distribution Plate D5 Pump Top: x1.
D5 O-ring: x1.
Spectrum 2.0 DRGB LED Strip: x1.
Mounting Fasteners: M4x30mm Countersunk: x4. M4-Nut: x4.
Remove the tempered glass panel from the front of the case, with the front tempered glass removed insert the Distribution plate and align it with the radiator mounting holes so that the D5 pump mount clears the lower portion of the radiator mount. With the included M4x30mm countersunk screw and M4-nuts mount the distribution plate with screws go through the front of the case and the M4-nuts threaded from the inside of the case.