Icemodz RGB LED Strip – compatible w/ Asus MB
AUD $17.10 – AUD $21.10
- Additional information
You will require a RGB controller for the strip to work on Asus motherboard.
Compatible with Asus motherboards , LED colors match the Asus AURA software perfectly!
The leds can be cut every 10cm
- 4pin Connector for the Control box
- Achieve that professional modified look
- Led strips are 10mm wide and 2.5mm high
- Some of the advantages over cold cathodes are:
- Can be cut every 3-6 LEDs, in case you need a small stripe of LEDs to illuminate a small corner of the case, or a waterblock.
- More versatile, you can cut them and solder them again to make turns around the case.
- Better illumination of the case.
- More compact. instead of giant and thick tubes, you have a very thin and manageable stripe LEDs.
- Directed illumination, you can chose where you want the light to go.
- Power cable is not limited to 30cm like the cold cathodes (if you make extensions for cathodes you’ll lose power)
|Dimensions||20 × 20 × 2 cm|
100 cm, 60 cm