MDPC-X Small Heatshrink 4:1 – Transparent

MDPC-X Small Heatshrink 4:1 – Transparent

AUD $7.50

Sold Per 1m
  • Initial ID 7.4mm (Over-expansion > 10mm).
  • 4.35:1 Shrink ratio (Over-expansion can reach 6:1 shrink ratio).
  • Can be shrinked down to 1.7mm ID.
  • Description
  • Additional information
  • Reviews
  • Product Enquiry


The offered lengths of transparent heat-shrink SMALL are based on meters (m). 1 m is ~3.3 feet, 10 m is ~33 feet, etc.

This is – very likely – the best heat-shrink in existence for the purpose of cable sleeving.

The sum of its properties makes the whole sleeving process as easy as never before:

  • 4,35:1 shrink ratio. Over-expanded you can reach a 6:1 shrink ratio.
  • Initial 7.4mm ID (over-expanded > 10mm) for total clearance when moving it over the cable sleeving in every situation.
  • Shrinking down to 1.7mm for maximum grip and compression on 15-18 AWG wires. Perfect shaping of melted sleeving on the crimp terminal.
  • See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving.
  • See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”.
  • Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue.
  • Ultra-thin material (0.2 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving.
  • Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique.
  • Made in Germany only for MDPC-X. Globally unique product in a class of its own.

Additional information

Weight 0.005 kg
Dimensions 2 × 2 × 1 cm

Product Enquiry