The Lian Li PC-O11 Front Dual D5 Distribution Plate has dual integrated D5 pump tops, reservoirs and comes included with Protium D5 Pump Covers. It is designed to be mounted onto the front panel of the Lian Li PC-O11 in the place of the standard tempered glass front panel. Each loop has a fill and drain port along with one inlet and outlet. The heights of the inlets and outlets have been designed around the component heights on an ATX motherboard. This means that the ports for the GPU loop at set at a height above and below the top and bottom GPUs so that tube runs can be as direct as possible, and ports for the CPU loop are similarly configured. The fill ports are on the front for easy access while the drain ports are on the inside of the case so that a valve can be added.